Dual spindle design complemented with 2 Y-axis and 3 power turrets Workpieces can complete milling, tapping or even composite procedures such as eccentric turning in one jig fixture

The QuickTECH T8 HYBRID combines powerful main spindle turning utilizing a 3 axis BMT-55 power turret with a sub spindle featuring a 4 axis gang slide, including a 360 degree B axis. This, high production CNC turning center is cast from Meehanite iron. With a 65mm bar capacity, this unique bar processing center provides complete part machining including all complex milling functions. The T8 HYBRID features 9 total axes, 2 turning spindles, 2 live milling spindles, a B axis, and a minimum capacity of 38 tools. . Turning Spindles The main spindle sports a 15HP high torque spindle motor. The sub-spindle is equipped with a 7.5HP high torque integral spindle motor for backworking. The main spindle has a 8” chuck with 65mm bar capacity (60mm with collet chuck) and the sub-spindle has 32mm bar capacity. Both spindles feature a full continuous C axis with braking system. The main spindle is standard with either the 8” 3 jaw chuck or 60mm DIN-185E-60B collet chuck. The sub spindle is standard with the 42mm DIN-173E-42B collet chuck. The main and sub-spindle are synchronized for fast and accurate part transfer. Both spindles employ P4 high precision bearings for stability and heavy cutting ability. Tooling System The main spindle features a rigid 12 station BMT-55 live turret with 5HP spindle motor and 80mm of true linear Y axis travel. The turret features fast servo motor index and rigid hydraulic clamping. All 12 stations can be live. The sub spindle features a unique 4 axis gang tooling system consisting of linear X,Y, and Z axes plus a rotary 360 degree B axis. The sub tool post features 5 O.D. turning tools, 9 I.D. turning tools, and 12 live tools. The live tools are mounted in a continuous 360 degree B axis. The live tools are powered by a 2HP spindle motor. Rigid tapping is standard in both the turret and the B axis. Construction The machine frame and all major components are made from the highest quality cast iron. The machine weighs in at an impressive 13,420 lbs. The bed is a one piece 75 degree slant bed. The turret Y axis is a true linear axis, perpendicular to X for ultimate precision. The T8 Hybrid uses large, 35mm Hiwin roller type linear guideways in all linear axes. The 35mm rails increase stability and allow heavier cutting. The large 32mm ballscrews are double anchored, pre-tensioned and direct coupled to the Mitsubishi servo motors thus promoting precision. CNC Controls The machine is equipped standard with the fully featured and powerful Mitsubishi M830S control with 15” LCD. All spindles and axes use Mitsubishi AC servo motors and Mitsubishi amplifiers. The completely matched Mitsubishi CNC system provides extreme reliability and high performance. A 3 year warranty is standard on the CNC system. Optionally, the Fanuc OiT-F with 15” LCD is available. The Fanuc system utilizes all Fanuc servo and spindle motors and drives and comes with a standard 2 year warranty. Standard Features The machine come with standard features necessary for production turning such as collet chucks, parts catcher, parts conveyor, 400 PSI coolant pump, chip conveyor, and bar feeder interface.

The QuickTECH T8 TWIN Y combines a powerful 2.5” bar capacity main spindle utilizing a 3 axis BMT-55 power turret with a sub spindle. This, high production CNC turning center is cast from Meehanite iron. With a 65mm bar capacity, this unique bar processing center provides complete part machining including complex milling functions. The T8 TWIN features 6 total axes, 2 turning spindles, 1 live milling turret, and a minimum capacity of 12 tools. . Turning Spindles The main spindle sports a 20HP high torque spindle motor. The sub-spindle is equipped with a 7.5HP high torque spindle motor for backworking. The main spindle has a 65mm bar capacity and the sub-spindle has a 32mm bar capacity. Both spindles feature a full continuous C axis with braking system. The main spindle is standard with an 8” 3 jaw hydraulic chuck. The sub spindle is standard with 6” 3 jaw hydraulic chuck. Collet chucks are available for both spindles. The main and sub-spindle are synchronized for fast and accurate part transfer. Both spindles employ P4 high precision bearings for stability and heavy cutting ability. Tooling System The machine features a rigid 12 station BMT-55 live turret with 5HP spindle motor and 80mm of true linear Y axis travel. The turret features fast servo motor index and rigid hydraulic clamping. All 12 stations can be live. Furthermore, with the standard Y axis, each station can be gang tooled allowing up to 36 total tools. Rigid tapping is standard in the turret. Construction The machine frame and all major components are made from the highest quality cast iron. The machine weighs in at an impressive 12,540 lbs. The bed is a one piece 75 degree slant bed. The turret Y axis is a true linear axis, perpendicular to X for ultimate precision. The T8 TWIN Y uses large, 35mm Hiwin roller type linear guideways in all linear axes. The 35mm rails increase stability and allow heavier cutting. The large 32mm ballscrews are double anchored, pre-tensioned and direct coupled to the Mitsubishi servo motors thus promoting precision. CNC Controls The machine is equipped standard with the fully featured and powerful Mitsubishi M80A control with 10.4” LCD. All spindles and axes use Mitsubishi AC servo motors and Mitsubishi amplifiers. The completely matched Mitsubishi CNC system provides extreme reliability and high performance. A 3 year warranty is standard on the CNC system. Optionally, the Fanuc OiT-F with 10.4” LCD and Manual Guide i Conversational is available. The Fanuc system utilizes all Fanuc servo and spindle motors and drives and comes with a standard 2 year warranty. Standard Features The machine come with standard features necessary for production turning such as 3 jaw chucks for main and sub, parts catcher, parts conveyor, 75 PSI coolant pump, chip conveyor, and bar feeder interface.

The QuickTECH i-42 Ultimate / i-60 Ultimate is a compact, high precision, high production CNC turning and milling center cast from Meehanite iron. Available in both 42mm and 60mm bar capacities, this unique bar processing center provides complete part machining including all complex milling functions. The i-42/i-60 features 10 axes, 2 turning spindles, 2 milling spindles, 2 B axes, and a total capacity of 49 tools. A 4 axis (X,Y,Z,B) gang type vertical tool post serves each C axis spindle. Turning Spindles The main spindle sports a 15HP high torque spindle motor. The sub-spindle is equipped with a 5HP high torque integral spindle motor for backworking. The integral motor eliminates belts and provides superior accuracy and part finishes. The main spindle has a 42mm bar capacity (60mm for i-60) and the sub-spindle has 30mm bar capacity. Both spindles feature a full continuous C axis with braking system and are both standard with 42mm DIN-173E-42B collet chucks (60mm DIN-185E-60B for i-60). The main and sub-spindle are synchronized for fast and accurate part transfer. Both spindles employ P4 high precision bearings for stability and heavy cutting ability. Tooling System A unique 4 axis gang tooling system consisting of linear X,Y, and Z axes plus a rotary B axis serves each spindle. The main tool post features 6 O.D. turning tools, 5 I.D. turning tools, and 12 live tools. The sub tool post features 5 O.D. turning tools, 9 I.D. turning tools, and 12 live tools. The live tools are mounted in a continuous 360 degree B axis. The live tools are powered by a 2HP spindle motor. Rigid tapping is standard. Each tool post has a Y axis for off center milling operations. Tool change time is near ZERO. Construction The machine frame and all major components are made from the highest quality cast iron. The machine weighs in at an impressive 9,240 lbs. The i-42/60 uses large, 35mm Hiwin roller type linear guideways in all linear axes. The 35mm rails increase stability and allow heavier cutting. The large 32mm ballscrews are double anchored, pre-tensioned and direct coupled to the Mitsubishi servo motors thus promoting precision. CNC Controls The machine is equipped standard with the fully featured and powerful Mitsubishi M830S control with 15” LCD. All spindles and axes use Mitsubishi AC servo motors and Mitsubishi amplifiers. The completely matched Mitsubishi CNC system provides extreme reliability and high performance. A 3 year warranty is standard on the CNC system. Optionally, the Fanuc OiT-F Plus with 15” LCD is available. The Fanuc system utilizes all Fanuc servo and spindle motors and drives and comes with a standard 2 year warranty. Standard Features The machine come with standard features necessary for production turning such as collet chucks, parts catcher, parts conveyor, 400 PSI coolant pump, chip conveyor, and bar feeder interface.

The QuickTECH i-42 Ultimate / i-60 Ultimate is a compact, high precision, high production CNC turning and milling center cast from Meehanite iron. Available in both 42mm and 60mm bar capacities, this unique bar processing center provides complete part machining including all complex milling functions. The i-42/i-60 features 10 axes, 2 turning spindles, 2 milling spindles, 2 B axes, and a total capacity of 49 tools. A 4 axis (X,Y,Z,B) gang type vertical tool post serves each C axis spindle. Turning Spindles The main spindle sports a 15HP high torque spindle motor. The sub-spindle is equipped with a 5HP high torque integral spindle motor for backworking. The integral motor eliminates belts and provides superior accuracy and part finishes. The main spindle has a 42mm bar capacity (60mm for i-60) and the sub-spindle has 30mm bar capacity. Both spindles feature a full continuous C axis with braking system and are both standard with 42mm DIN-173E-42B collet chucks (60mm DIN-185E-60B for i-60). The main and sub-spindle are synchronized for fast and accurate part transfer. Both spindles employ P4 high precision bearings for stability and heavy cutting ability. Tooling System A unique 4 axis gang tooling system consisting of linear X,Y, and Z axes plus a rotary B axis serves each spindle. The main tool post features 6 O.D. turning tools, 5 I.D. turning tools, and 12 live tools. The sub tool post features 5 O.D. turning tools, 9 I.D. turning tools, and 12 live tools. The live tools are mounted in a continuous 360 degree B axis. The live tools are powered by a 2HP spindle motor. Rigid tapping is standard. Each tool post has a Y axis for off center milling operations. Tool change time is near ZERO. Construction The machine frame and all major components are made from the highest quality cast iron. The machine weighs in at an impressive 9,240 lbs. The i-42/60 uses large, 35mm Hiwin roller type linear guideways in all linear axes. The 35mm rails increase stability and allow heavier cutting. The large 32mm ballscrews are double anchored, pre-tensioned and direct coupled to the Mitsubishi servo motors thus promoting precision. CNC Controls The machine is equipped standard with the fully featured and powerful Mitsubishi M830S control with 15” LCD. All spindles and axes use Mitsubishi AC servo motors and Mitsubishi amplifiers. The completely matched Mitsubishi CNC system provides extreme reliability and high performance. A 3 year warranty is standard on the CNC system. Optionally, the Fanuc OiT-F Plus with 15” LCD is available. The Fanuc system utilizes all Fanuc servo and spindle motors and drives and comes with a standard 2 year warranty. Standard Features The machine come with standard features necessary for production turning such as collet chucks, parts catcher, parts conveyor, 400 PSI coolant pump, chip conveyor, and bar feeder interface.

Structure is designed with finite element analysis, enhancing dynamic rigidity and stability Highly efficient cutting capability

The Z axis travel of the machine is 1100mm and equipped with box way , it could allow for enhance heavy cutting capabilities. On the other hand, we also design longer Z axis travel – 2000mm to meet customer’s demands.

Structure is designed with finite element analysis, enhancing dynamic rigidity and stability Highly efficient cutting capability

Structure is designed with finite element analysis, enhancing dynamic rigidity and stability Highly efficient cutting capability

Box way and powerful spindle design, allowing for enhanced heavy cutting capabilities Slanted bed design to reach high stability, and allowing for easily chip removal

The Z axis travel of the machine is 1100mm and equipped with box way , it could allow for enhance heavy cutting capabilities. On the other hand, we also design longer Z axis travel – 2000mm to meet customer’s demands.