New United Machining CUT X 500 | Wire EDM
ConditionNew
New
Extreme accuracy
Ultra-High Contour Accuracy, Ultra-High pitch Accuracy and Surface Quality.
Simple
Go for automation, make your life easier and single source.
Fast
Unmanned workpiece preparation, Decouple manual interventions from machine production and unattended production from GFMS Solutions.
MACHINE DESIGN
The machining precision on the CUT X is a perfect combination of strong mechanical concepts, proven machining processes and a unique wire guidance system with open or closed guides.
Totally new wire circuit, unique twin wire plate and new upper and lower heads design.
Working area with thermo-stabilization, collision protection and linear scale available on all axes.
New filtration, hydraulic and electrical cabinet in one place concept.
This series comes with the new UNIQUA human/machine interface, merging more than a century of EDM technology.
Type of machining
Submerged wire cutting
Dimensions of complete equipment *
2822 x 3533 x 2444 mm
111.1 x 139.09 x 96.22 in
Total weight of the equipment without dielectric
4700 kg
10362 lbs
Machining Area
Work tank
Automatic drop tank
Accessibility
Front + Left sides
Max. workpiece dimensions *
1050 x 700 x 250 mm
41.34 x 27.56 x 9.84 in
Max. workpiece weight without bath
800 kg
1764 lbs
Dimensions of table **
850 x 450 mm
33.46 x 17.71 in
Floor-to-table distance
1000-1100 mm
39.37-43.3 in
Total volume of dielectric fluid
950 l
251 gal
Dielectric level adjustment
0 – 250 mm (automatic)
0 – 9.84 in (automatic)
Dielectric type
Deionized water
X, Y, Z and U, V axes
X, Y, Z travel *
500 x 350 x 256 mm
19.68 x 13.78 x 10.08 in
U, V travel **
± 70 mm
2.75 in
Max. speed (X, Y and U, V axes)
3 m/min
9.84 ft/min
Max. manual position speed
2 m/min
6.56 ft/min
Linear glass scales
Standard all axes (X,Y,U,V)
Integrated Collision Protection (ICP)
Standard on 5 axes (X,Y,Z,U,V)
Taper machining
Max. taper 30°/100 mm
3.94 in
Electrical supply (machine)
Three-phase input voltage 400 V ±10%
Maximum consumption 10.4 kVA
Compressed air connection
Pressure
0.6 – 0.8 Mpa
87-116 PSI
Maximum consumption
150 l/min
40 gal/min
* Width x depth x height ** Width x depth
Extreme accuracy
Ultra-High Contour Accuracy, Ultra-High pitch Accuracy and Surface Quality.
Simple
Go for automation, make your life easier and single source.
Fast
Unmanned workpiece preparation, Decouple manual interventions from machine production and unattended production from GFMS Solutions.
MACHINE DESIGN
The machining precision on the CUT X is a perfect combination of strong mechanical concepts, proven machining processes and a unique wire guidance system with open or closed guides.
Totally new wire circuit, unique twin wire plate and new upper and lower heads design.
Working area with thermo-stabilization, collision protection and linear scale available on all axes.
New filtration, hydraulic and electrical cabinet in one place concept.
This series comes with the new UNIQUA human/machine interface, merging more than a century of EDM technology.
Type of machining
Submerged wire cutting
Dimensions of complete equipment *
2822 x 3533 x 2444 mm
111.1 x 139.09 x 96.22 in
Total weight of the equipment without dielectric
4700 kg
10362 lbs
Machining Area
Work tank
Automatic drop tank
Accessibility
Front + Left sides
Max. workpiece dimensions *
1050 x 700 x 250 mm
41.34 x 27.56 x 9.84 in
Max. workpiece weight without bath
800 kg
1764 lbs
Dimensions of table **
850 x 450 mm
33.46 x 17.71 in
Floor-to-table distance
1000-1100 mm
39.37-43.3 in
Total volume of dielectric fluid
950 l
251 gal
Dielectric level adjustment
0 – 250 mm (automatic)
0 – 9.84 in (automatic)
Dielectric type
Deionized water
X, Y, Z and U, V axes
X, Y, Z travel *
500 x 350 x 256 mm
19.68 x 13.78 x 10.08 in
U, V travel **
± 70 mm
2.75 in
Max. speed (X, Y and U, V axes)
3 m/min
9.84 ft/min
Max. manual position speed
2 m/min
6.56 ft/min
Linear glass scales
Standard all axes (X,Y,U,V)
Integrated Collision Protection (ICP)
Standard on 5 axes (X,Y,Z,U,V)
Taper machining
Max. taper 30°/100 mm
3.94 in
Electrical supply (machine)
Three-phase input voltage 400 V ±10%
Maximum consumption 10.4 kVA
Compressed air connection
Pressure
0.6 – 0.8 Mpa
87-116 PSI
Maximum consumption
150 l/min
40 gal/min
* Width x depth x height ** Width x depth
We use cookies to improve your experience. Privacy Policy.