New United Machining DRILL E 300 | EDM Small Hole-Driller
ConditionNew
New
Simply drill holes in multiple configurations
AgieCharmilles DRILL E 300 is a high-speed drill machine widely used for drilling starting holes. In aerospace for aircraft engines, as well as gas turbines in energy production, cooling holes are needed for creating a film of cooling air on the surface of turbine blades and vanes to prevent them from overheating. The DRILL E 300 is the perfect solution when you need to add small holes on a part with inclined faces or hard-to-reach positions.
Electrode diameter
0.3 up to 3 mm (option: 0.10, 0.15, 0.20 mm)
0.004 up to 0.12 in (option: 0.004, 0.006, 0.008 in)
Maximum drilling depth
200 mm
7.78 in
Maximum workpiece weight
300 kg
660 lb
Travel paths of axes X, Y and Z
300 x 200 x 300 mm
11.8 x 7.8 x 11.8 in
Worktable size (width x length)
400 x 300 mm
15.7 x 11.8 in
Rotating spindle
57.5 rpm
Travel path of the electrode guide
100 mm
3.9 in
Heavy duty generator
30 A
Dielectric volume
16 l
4.2 us gal
Mains connections
3 x 400 V
50/60 Hz
Maximum power consumption
5 kW
Display
TFT Touch screen, 12.1”
Pump operating pressure
70 bar
Machine dimensions
1345 x 940 x 2040 mm
52.9 x 37 x 80.3 in
Total weight of the machine
870 kg
1918 lbs
Options: fine drill holders and guides, filtration system, deionization unit, AC CAM DRILL
Simply drill holes in multiple configurations
AgieCharmilles DRILL E 300 is a high-speed drill machine widely used for drilling starting holes. In aerospace for aircraft engines, as well as gas turbines in energy production, cooling holes are needed for creating a film of cooling air on the surface of turbine blades and vanes to prevent them from overheating. The DRILL E 300 is the perfect solution when you need to add small holes on a part with inclined faces or hard-to-reach positions.
Electrode diameter
0.3 up to 3 mm (option: 0.10, 0.15, 0.20 mm)
0.004 up to 0.12 in (option: 0.004, 0.006, 0.008 in)
Maximum drilling depth
200 mm
7.78 in
Maximum workpiece weight
300 kg
660 lb
Travel paths of axes X, Y and Z
300 x 200 x 300 mm
11.8 x 7.8 x 11.8 in
Worktable size (width x length)
400 x 300 mm
15.7 x 11.8 in
Rotating spindle
57.5 rpm
Travel path of the electrode guide
100 mm
3.9 in
Heavy duty generator
30 A
Dielectric volume
16 l
4.2 us gal
Mains connections
3 x 400 V
50/60 Hz
Maximum power consumption
5 kW
Display
TFT Touch screen, 12.1”
Pump operating pressure
70 bar
Machine dimensions
1345 x 940 x 2040 mm
52.9 x 37 x 80.3 in
Total weight of the machine
870 kg
1918 lbs
Options: fine drill holders and guides, filtration system, deionization unit, AC CAM DRILL
We use cookies to improve your experience. Privacy Policy.