

The Micro Dynamics MEGA 30V-F Vertical Machining Center was designed for the machining of all workpieces small to medium in size. The rigidity and the power of the machine, coupled with its DYPEC® Thermal Compensation, makes the machine one of the most accurate and versatile machining center available for all type of manufacturing facilities from aerospace, to medical, to general job shops. It’s the complete machine at a very affordable price.
TRAVEL
X Axis 30”
Y Axis 20”
Z Axis 20”
Spindle Nose to Table Surface 3.93” ~ 24”
Spindle Center to Column Front 21.6”
Door Open Width for Work Piece 26”
TABLE
Table Size 33.95” × 19.68”
T-Slots (Width x Quantity) 0.71” × 5 (P=3.94”)
Max. Workpiece Size 20” x 20” x 20”
Max. Table Load 1,764 lbs.
Table Height (from the ground) 33”
FEEDRATE
Rapid Feedrate - X Axis 2,047 ipm
Rapid Feedrate - Y Axis 2,047 ipm
Rapid Feedrate - Z Axis 1,889 ipm
Cutting Feedrate 0 ~ 787 ipm
Jog Feedrate 0 ~ 118 ipm
AXIS INFO
Ball Screw - X Axis Φ1.26” × P0.63”
Ball Screws – Y & Z Axis Φ1.57” × P0.63”
Linear Guideways - X Axis THK – SRG30LR - 2 Trucks
Linear Guideways - Y Axis THK – SRG35R - 2 Trucks
Linear Guideways - Z Axis THK – SRG35LR - 2 Trucks
X Axis Servo Motor 2.68 HP
Y Axis Servo Motor 2.68 HP
Z Axis Servo Motor 4.69 HP
SPINDLE
Spindle Taper NST No.40 Dual Contact
I.D. of Spindle Bearing Φ2.76”
Spindle Motor Power 30 (2 min.) / 25 HP
Max. Cutting Torque 87 ft-lbs.
Spindle Speed 50 ~ 15,000 rpm
Spindle Driving Mechanism Direct Drive
Max. Speed for Rigid Tapping 3,000 rpm
Clamping Force 2,425 +/- 10% lbf
AUTOMATIC TOOL CHANGER
Magazine Capacity 30 Tools
Tool Selection Bi-Direction / Random
Tool Shank Type CT 40 ANSI 5.50 / BT40 JIS6339
Max. Tool Dia. x Length Φ2.95” × 9.10”
Without Adjacent Tool φ5.9”
Max. Tool Weight 15.4 lbs.
ATC Cam Box Motor 0.74 HP
ATC Time (Tool to Tool) 1.9 sec
ATC Time (Chip to Chip) 3.2 sec
COOLANT SYSTEM
Cutting Coolant Pump Motor 1.48 HP
Base Wash Pump Motor 1 HP
Pump Flow Rate 15.85 gpm
Pump Pressure 29 psi
Coolant Tank Capacity 63 gal
POWER & AIR REQUIREMENTS
Power Consumption (220V/3PH) 40 KVA
Main Breaker Capacity 105 Amp
Main Power Cable Size 22 mm2
Pneumatic Supply 300 (0.6MPa) L/min (ANR)
GENERAL
Foot Print Size (W x D) 95” x 90.28”
Machine Height (H) 111.42”
Machine Net Weight 10,500 lbs.
ACCURACY (Full Travel ~ Laser Calibrated)
Positioning Accuracy / Full Stroke 0.0002” (VDI 3441)
Repeatability Accuracy 0.0001” (VDI 3441)
Main Machine Features
Powerful Fanuc 0iMF Plus CNC Control
Heavily ribbed, Meehanite FC300 Cast Iron
High Torque Fanuc Spindle motor is rated at 30 HP and delivers 87 Ft-Lbs of torque
Direct Drive 15,000 RPM Spindle for high efficiency machining
Spindle Oil Cooler by Inverter Control for Precise Control
DYPEC® Thermal Compensation
Large Size 30mm (X) and 35mm (Y, Z) Cross Roller Linear Rails
Large Diameter Ballscrews 32mm X, 40mm Y and Z axis
High rapid traverse rates of 2,047 X, Y and 1,889 Z
Fine Surface Machining (Smooth Tolerance Control, Jerk Control & Machining Condition Selection)
1,500 Block Look Ahead Expansion of AICC II
15” Touchscreen display with built in “Operator Convenience” HMI
Floor Space 95” (including chip Conveyor) x 97” depth
Standard Features
30 Station High Speed Automatic Tool Changer
Fully Enclosed Splash Guards
Chip Management System with Scraper Type Chip Conveyor and Wash Down
Flood Coolant and Tool Tip Air Blow
Coolant Thru Spindle Capable
15,000 RPM with 30 HP Direct Drive Spindle capable of achieving 87 FT-Lbs of torque
DYPEC® - Dynamic Predictive Error Compensation
8GB Of Data Server Memory
8Mbyte Main Memory
Multi Axis CRT/Operator Panel for better Ergonomics
The Micro Dynamics MEGA 30V-F Vertical Machining Center was designed for the machining of all workpieces small to medium in size. The rigidity and the power of the machine, coupled with its DYPEC® Thermal Compensation, makes the machine one of the most accurate and versatile machining center available for all type of manufacturing facilities from aerospace, to medical, to general job shops. It’s the complete machine at a very affordable price.
Imperial
| X | 30" |
| Y | 20" |
| Z | 20" |
| Power | 25 hp |
| RPM | 15,000 RPM |
| # ATC | 30 |
| Taper | 40 |
| Table-W | 19.68" |
| Table-L | 33.95" |
| # Axis | 3 |
| Weight | 10,400 |
TRAVEL
X Axis 30”
Y Axis 20”
Z Axis 20”
Spindle Nose to Table Surface 3.93” ~ 24”
Spindle Center to Column Front 21.6”
Door Open Width for Work Piece 26”
TABLE
Table Size 33.95” × 19.68”
T-Slots (Width x Quantity) 0.71” × 5 (P=3.94”)
Max. Workpiece Size 20” x 20” x 20”
Max. Table Load 1,764 lbs.
Table Height (from the ground) 33”
FEEDRATE
Rapid Feedrate - X Axis 2,047 ipm
Rapid Feedrate - Y Axis 2,047 ipm
Rapid Feedrate - Z Axis 1,889 ipm
Cutting Feedrate 0 ~ 787 ipm
Jog Feedrate 0 ~ 118 ipm
AXIS INFO
Ball Screw - X Axis Φ1.26” × P0.63”
Ball Screws – Y & Z Axis Φ1.57” × P0.63”
Linear Guideways - X Axis THK – SRG30LR - 2 Trucks
Linear Guideways - Y Axis THK – SRG35R - 2 Trucks
Linear Guideways - Z Axis THK – SRG35LR - 2 Trucks
X Axis Servo Motor 2.68 HP
Y Axis Servo Motor 2.68 HP
Z Axis Servo Motor 4.69 HP
SPINDLE
Spindle Taper NST No.40 Dual Contact
I.D. of Spindle Bearing Φ2.76”
Spindle Motor Power 30 (2 min.) / 25 HP
Max. Cutting Torque 87 ft-lbs.
Spindle Speed 50 ~ 15,000 rpm
Spindle Driving Mechanism Direct Drive
Max. Speed for Rigid Tapping 3,000 rpm
Clamping Force 2,425 +/- 10% lbf
AUTOMATIC TOOL CHANGER
Magazine Capacity 30 Tools
Tool Selection Bi-Direction / Random
Tool Shank Type CT 40 ANSI 5.50 / BT40 JIS6339
Max. Tool Dia. x Length Φ2.95” × 9.10”
Without Adjacent Tool φ5.9”
Max. Tool Weight 15.4 lbs.
ATC Cam Box Motor 0.74 HP
ATC Time (Tool to Tool) 1.9 sec
ATC Time (Chip to Chip) 3.2 sec
COOLANT SYSTEM
Cutting Coolant Pump Motor 1.48 HP
Base Wash Pump Motor 1 HP
Pump Flow Rate 15.85 gpm
Pump Pressure 29 psi
Coolant Tank Capacity 63 gal
POWER & AIR REQUIREMENTS
Power Consumption (220V/3PH) 40 KVA
Main Breaker Capacity 105 Amp
Main Power Cable Size 22 mm2
Pneumatic Supply 300 (0.6MPa) L/min (ANR)
GENERAL
Foot Print Size (W x D) 95” x 90.28”
Machine Height (H) 111.42”
Machine Net Weight 10,500 lbs.
ACCURACY (Full Travel ~ Laser Calibrated)
Positioning Accuracy / Full Stroke 0.0002” (VDI 3441)
Repeatability Accuracy 0.0001” (VDI 3441)
Main Machine Features
Powerful Fanuc 0iMF Plus CNC Control
Heavily ribbed, Meehanite FC300 Cast Iron
High Torque Fanuc Spindle motor is rated at 30 HP and delivers 87 Ft-Lbs of torque
Direct Drive 15,000 RPM Spindle for high efficiency machining
Spindle Oil Cooler by Inverter Control for Precise Control
DYPEC® Thermal Compensation
Large Size 30mm (X) and 35mm (Y, Z) Cross Roller Linear Rails
Large Diameter Ballscrews 32mm X, 40mm Y and Z axis
High rapid traverse rates of 2,047 X, Y and 1,889 Z
Fine Surface Machining (Smooth Tolerance Control, Jerk Control & Machining Condition Selection)
1,500 Block Look Ahead Expansion of AICC II
15” Touchscreen display with built in “Operator Convenience” HMI
Floor Space 95” (including chip Conveyor) x 97” depth
Standard Features
30 Station High Speed Automatic Tool Changer
Fully Enclosed Splash Guards
Chip Management System with Scraper Type Chip Conveyor and Wash Down
Flood Coolant and Tool Tip Air Blow
Coolant Thru Spindle Capable
15,000 RPM with 30 HP Direct Drive Spindle capable of achieving 87 FT-Lbs of torque
DYPEC® - Dynamic Predictive Error Compensation
8GB Of Data Server Memory
8Mbyte Main Memory
Multi Axis CRT/Operator Panel for better Ergonomics
We use cookies to improve your experience. Privacy Policy.